• 40 mm thick insulation material
• 60 micron polythene cover
• All with rigid lids

• Complies with EAGA specification
• Exceeds requirements for Water Bylaw 30 and BS 7181: 1989
• Complete with fixings
• Easy to fit

• The product is supplied as a single piece wrap round jacket with a separate rigid lid
• Packed in outers of 5 jackets (except 61708 and 61714 which are outers of 3)
• Supplied with fitting instructions
• Made in England

• Suitable for most types of rectangular and circular cold water storage tanks.
• Special sizes available for non-standard tanks.

• The insulation consists of natural glass wool which is CFC free and will not rot or degrade in use. It is lightweight, resilient and non-combustible and provides excellent thermal insulation.
• The material complies with the requirements of BS476: Part 4 and BS5803: Part 1. It is nominal thickness of 40mm with density of 10 kg/m³, and a thermal resistance of 1.4 m² k/w.
• The outer sleeve is made from black polythene with a minimum thickness of 60 microns.
• The jacket is supplied complete with heavy duty fixing tapes.

• Unroll panel and shake lightly to allow the glass-fibre to expand.
• Place the lid panel on top of the tank lid allowing flanges to hang down sides. If the lid must be cut to accommodate pipes then they must be taped in order to minimise risk of water contamination.
• Wrap main panel around tank, ensuring there are no gaps and tuck in tightly around lid pipes.
• Secure with tie wraps provided. Do not over-tighten as this will reduce the effectiveness of the insulation.
• Give final overall inspection to ensure even coverage.

back to top

technical specifications page

tel:  +44 (0)1274 370555  

fax: +44 (0)1274 726245

Sealcraft,

Sealcraft House,

Grant Street,

Bradford,

United Kingdom

BD3 9HD