|
Silicone P |
|
Features |
|
- Silicone rubber compression
seal
- Unaffected by paint
- Simple staple fixing
- Low closing force required
|
 |
|
Performance Benefits |
- Remains flexible at very low temperatures
- Excellent memory and wear resistance
- Small section is ideal for rebate fixing
- Can also be bonded in position with silicone
adhesive
|
|
Typical
Applications |
- Timber casement windows
- Timber pivot windows
- Also suitable for timber door
frames with small gaps
|
|
Product
Specification |
- The product is supplied in
coils of 25m cut length. Individually bagged. Silicone adhesive
(Product ref: 61600-white) can also be supplied in 310m
cartridges if required. Once installed it requires no
maintenance and can be wiped clean with a non-abrasive cleaner.
|
|
Part No. |
Quantity |
Colour |
| 61008 |
25m |
White |
|
| |
|
Technical Details |
|
The seal is made of extruded
silicone elastomer giving it unique properties and making it ideal
for compression seal draught proofing. These include, exceptional
resistance to UV and weathering, an operating temperature range of
-30°C to 200°C and far superior compression set resistance to any
other material. |
|
Fitting Details |
|
The seal is fitted into the
innermost rebate of the window or door frame. The product must be
cut to suit each length and must not be curved round corners.
Ensure vertically mounted pieces are allowed to drain if
necessary. Fix into position with staples pitched at no more than
100mm (4"), for adhesive fixing. Ensure the substrate is cleaned
and degreased. Apply adhesive in a continuous bead, and press seal
into position. The window or door must be left partially open for
1½ hours for adhesive curing. No further adjustment will be
necessary. |
|
|
|
Standards |
|
Compliance
with BS 7386:1990 Class II Product |
|
Parameter |
|
Standard Requirement |
Test Result |
|
A2. Product size and dynamic
characteristics (N) Maximum |
|
80 |
29.7 |
|
A3. Set under sustained
compression (% recovery) Minimum |
-10°C |
55 |
84 |
|
20°C |
55 |
87 |
|
55°C |
55 |
76 |
|
A7. Air leakage m³/h @ 100Pa
Maximum |
|
7.45 |
0.30 |
|
A8. Resistance to wear (mm)
Maximum |
|
0.50 |
0.43 |
|
|
back to top |
|
technical
specifications page |
|
| |
|
