|
Silicone Louvreseal |
|
Features |
|
- Silicone rubber blade seal
- Unaffected by paint
- Simple adhesive fixing
- Low closing force required
- Transluscent
|
 |
|
Performance Benefits |
- Remains flexible at very low
temperatures
- Excellent memory and wear
resistance
- Completely resistant to
weathering
|
|
Typical
Applications |
- Designed primarily for louvre
windows
- Also suitable as an angled
edge seal for any 6mm thick material to which silicone adhesive
will stick
|
|
Product
Specification |
- The product is supplied in
coils of 25mm cut length individually bagged and complete with
one 310ml cartridge of silicone adhesive. Once installed it
requires no maintenance and can easily be wiped clean with a
non-abrasive cleaner.
|
|
Part No. |
Quantity |
Colour |
| 61009 |
25m |
Transluscent |
|
| |
|
Technical Details |
- The seal is made of extruded
silicone elastomer giving it unique properties and making it
ideal for compression seal draught proofing. These include,
exceptional resistance to UV and weathering, an operating
temperature range of -30°C to 200°C and far superior compression
set resistance to any other material.
|
|
Fitting Details |
|
The seal is normally fixed to the
top edge of each louvre pane with the blade pointing outwards. On
the bottom louvre pane fix to the lower edge with the blade
pointing inwards. Fitting can be carried out from inside the
building. The edge to be sealed must be degreased prior to
adhesive application. Cut
the louvre seal to the required length. Apply a bead of adhesive
into the foot of the seal, then slide the seal into position over
the edge of the glass. When all panes have seal fitted, the window
must be left partially open for 1½ hours for adhesive curing. No
further adjustment will be necessary. |
|
|
|
Standards |
|
Compliance wih
BS 7386: 1990 |
|
Parameter |
Standard Requirement |
Test Result |
|
A2. Product size and dynamic
characteristics (N) Maximum |
80 |
17.3 |
|
A3. Set under sustained
compression (% recovery) Minimum |
-10°C |
55 |
89 |
|
20°C |
55 |
93 |
|
55°C |
55 |
91 |
|
A7. Air leakage m³/hr @ 100 Pa
Maximum |
7.45 |
2.74 |
|
A8. Resistance to wear (mm)
Maximum |
0.5 |
0.035 |
|
|
|
|
back to top |
|
technical
specification sheet |
|
| |
|
