|
Windowseal Pc/Ec |
|
Features |
|
- Closed cell EPDM rubber
- Reinforced self-adhesive
backing strip
- Low closing force required
- Easy to fit
|
 |
|
Performance Benefits |
- Easily compressed for ease of
window operation
- Excellent memory and wear
resistance
- Non-absorbent easy to clean
skin
- Does not harden or become
brittle with low temperatures
|
|
Typical
Applications |
- Wooden casement windows
- Wooden centre pivot windows
- Also suitable for close
fitting internal doors
|
|
Product
Specification |
- The product is supplied as cut
lengths of 100m in clear polythene bags. Always specify exact
length required when ordering.
|
|
Part No. |
Type |
Colour |
| 61503 |
Pc |
White |
|
61504 |
Pc |
Brown |
| 61501 |
Ec |
White |
|
61502 |
Ec |
Brown |
|
| |
|
Technical Details |
- The seal is made from a
special blend of high quality propylene diene monomer foam
rubber. This offers excellent resistance to ageing, ozone and
UV, and remains resistant at extremely low temperatures right
down to -40°C.
- EPDM rubber has exceptional
resistance to compression set, has very high tensile and tear
strength and is abrasion resistant. The cellular structure
absorbs less than 5% of it's dry weight in water, and is covered
with a non-absorbent easy to clean skin.
|
|
Fitting Details |
|
The seal is fitted to the innermost
rebate of the window or door frame. The product must be cut to
suit each length and must not be curved round corners. Ensure the
substrate is clean and de-greased prior to application. Remove
backing tape and press section firmly into position. For
additional security the product can be stapled in position. |
|
|
|
Parameters |
|
Technical
Parameters |
|
Material |
Expanded EPDM
closed cell structure |
|
Adhesive |
Synthetic,
pressure sensitive incorporating a non stretch fibre glass
skrim, protected by easy release liner. |
|
Service Temperature |
-40°C to 70°C |
|
Chemical Resistance |
Excellent for
all round applications to stained and decorative finishes |
|
Water Absorption |
Less than 5%
by weight |
|
Density |
0.35g/cm³ |
|
Force to compress |
350 - 550K Pa |
|
|
|
|
back to top |
|
technical
specifications page |
|
| |
|
